Details

---

BUY HD74LVC540ATELL-E https://www.utsource.net/itm/p/12611459.html

Parameter	Description	Value
Part Number	Full part number	HD74LVC540ATELL-E
Function	Octal D-type flip-flops with clear
Supply Voltage (Vcc)	Operating supply voltage	1.65V to 3.6V
Input Voltage (VIH)	High-level input voltage	Vcc - 0.1V
Input Voltage (VIL)	Low-level input voltage	0.1V
Output Voltage (VOH)	High-level output voltage	Vcc - 0.1V
Output Voltage (VOL)	Low-level output voltage	0.1V
Propagation Delay Time	Propagation delay time	2.8 ns (typical at Vcc=3.3V)
Power Dissipation	Maximum power dissipation	360 mW
Operating Temperature	Operating temperature range	-40掳C to +85掳C
Storage Temperature	Storage temperature range	-65掳C to +150掳C
Package Type	Package type	TSSOP
Pin Count	Number of pins	20

Instructions:

1. Power Supply: Ensure the supply voltage is within the specified range (1.65V to 3.6V). Connect Vcc to the positive supply and GND to ground.
2. Signal Levels: Input signals should comply with VIH and VIL specifications to ensure proper logic levels are recognized.
3. Output Loads: Outputs can drive TTL/CMOS inputs directly. Ensure load capacitance does not exceed recommended values for stable operation.
4. Clear Function: The CLEAR pin resets all flip-flops to a low state when asserted. Ensure this pin is tied to the appropriate level if not used.
5. Clock Synchronization: Data on the D inputs is transferred to the Q outputs on the rising edge of the clock pulse.
6. Handling Precautions: Handle with care to avoid damage from electrostatic discharge (ESD). Follow anti-static protocols during installation.
7. Mounting: Ensure proper mounting orientation and alignment of the component on the PCB to prevent soldering issues or mechanical stress.

(For reference only)