Details

---

BUY TLP543J https://www.utsource.net/itm/p/12611466.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	1.0	1.2	1.4	V	IF = 10 mA
Reverse Breakdown Voltage	VR	-	-	5	V
Forward Current	IF	-	10	50	mA
Output Collector-Emitter Voltage	VCE(OFF)	-	-	30	V	IO = 0.1 mA, IF = 0 mA
Output Collector Current	ICM	-	-	100	mA	tPULSE = 100 μs, Duty Cycle ≤ 1%
Output Leakage Current	ILEAK	-	1	10	μA	VCE = 30 V, IF = 0 mA
Propagation Delay Time	tPLH	0.5	1.5	3	μs	IF = 10 mA, VCC = 5 V, RL = 200 Ω
Storage Temperature Range	Tstg	-40	-	85	°C
Operating Temperature Range	Topr	-40	-	85	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP543J with care to avoid mechanical damage.
   • Ensure proper heat dissipation if used at high current levels.

2. Electrical Connections:

   • Connect the input side (anode and cathode) to the control circuit.
   • Connect the output side (collector and emitter) to the load circuit.
   • Ensure that the maximum ratings for forward current, reverse voltage, and output collector-emitter voltage are not exceeded.

3. Power Supply:

   • Use a stable power supply to ensure reliable operation.
   • The recommended operating voltage for the output side is between 5V and 30V.

4. Thermal Management:

   • If the device is expected to operate at high currents or in high ambient temperatures, consider using a heatsink to maintain the junction temperature within safe limits.

5. Testing:

   • Test the device under controlled conditions to verify its performance before integrating it into the final application.
   • Use a multimeter to check the continuity and resistance values to ensure the device is functioning correctly.

6. Storage:

   • Store the TLP543J in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposure to corrosive environments.

7. Safety Precautions:

   • Always follow standard safety procedures when handling electronic components.
   • Ensure that the device is properly isolated from live circuits during installation and testing.

(For reference only)