Details

---

BUY INA333AIDGKR? https://www.utsource.net/itm/p/12611472.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.7		5.5	V
Input Voltage Range	VCM	Relative to GND	-0.3		VDD+0.3	V
Output Voltage Swing	VOUT	Load = 10 k惟	0		VDD-1.2	V
Quiescent Current	IQ			60		渭A
Input Bias Current	IB			1		nA
Common-Mode Rejection Ratio	CMRR	f = 1 kHz		114		dB
Power-Supply Rejection Ratio	PSRR	f = 1 kHz		114		dB
Gain	AV			1000		V/V
Operating Temperature	Toper		-40		125	掳C

Instructions for Use:

1. Power Supply Connection:

   • Connect the power supply voltage (VDD) between VDD and GND pins. Ensure the supply voltage is within the specified range of 2.7V to 5.5V.

2. Input Signal Connection:

   • Apply the differential input signal across the IN+ and IN- pins. The common-mode input voltage should be within the range of -0.3V to VDD + 0.3V relative to GND.

3. Output Configuration:

   • Connect a load resistor from the output pin (OUT) to GND or another reference point. The output can swing from 0V to VDD - 1.2V depending on the load.

4. Biasing and Decoupling:

   • Place a decoupling capacitor close to the VDD and GND pins to ensure stable operation, typically 0.1渭F ceramic capacitors are recommended.

5. Operating Temperature:

   • Ensure the device operates within the temperature range of -40掳C to 125掳C for reliable performance.

6. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection measures during handling and assembly.

(For reference only)