Details

---

BUY KSD-01F D90 https://www.utsource.net/itm/p/12611473.html

Parameter	Description
Part Number	KSD-01F D90
Type	Thermal Protector
Operating Temperature Range	-40掳C to 125掳C
Nominal Tripping Temperature	90掳C 卤 5掳C
Housing Material	Flame Retardant Plastic (UL94 V-0)
Contact Form	Normally Closed (NC)
Maximum Current Rating	10A at 250VAC
Insulation Resistance	> 100M惟 at 500VDC
Dielectric Strength	2500VAC for 1 minute
Terminal Type	Quick Connect
Weight	Approx. 3g

Instructions:

1. Installation:

   • Ensure the thermal protector is installed in a location where it can accurately sense the temperature of the component or area it is protecting.
   • Use the quick connect terminals to attach the protector to the circuit.

2. Handling:

   • Avoid exposing the device to temperatures outside its operating range as this may affect performance or cause damage.
   • Do not apply mechanical stress to the terminals or housing during installation.

3. Testing:

   • Before installation, test the continuity of the protector using a multimeter to ensure it is functioning correctly.
   • After installation, verify that the protector trips at the nominal tripping temperature.

4. Maintenance:

   • Periodically inspect the protector for any signs of damage or wear.
   • Replace the protector if it has tripped due to overheating; do not attempt to reset it manually.

5. Disposal:

   • Dispose of the protector according to local regulations concerning electronic waste.

(For reference only)