Details

---

BUY 2SJ74 https://www.utsource.net/itm/p/12611483.html

Below is the parameter table and instructions for the 2SJ74 transistor:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	600	V
Collector-Base Voltage	VCBO	-	-	700	V
Emitter-Base Voltage	VEBO	-	-	7	V
Collector Current	IC	-	-	15	A
Base Current	IB	-	-	3	A
Power Dissipation	PT	-	-	180	W
Operating Temperature	TOP	-55	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Transition Frequency	fT	-	2.5	-	MHz
Maximum Operating Frequency	fMAX	-	5	-	MHz
Saturation Voltage (VCE(sat))	-	-	1.5	2.5	V
Forward Current Transfer Ratio (hFE)	-	20	-	80	-

Instructions

1. Handling and Storage:

   • Store the 2SJ74 in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the leads and body.

2. Mounting:

   • Ensure proper heat sinking when operating at high power levels to maintain the junction temperature within safe limits.
   • Use thermal paste between the transistor and the heat sink for better thermal conductivity.

3. Biasing:

   • Proper biasing is crucial for stable operation. Use a suitable base resistor to limit the base current and prevent thermal runaway.
   • Ensure the base-emitter voltage (V_BE) is within the specified range to avoid damage.

4. Protection:

   • Use a fast-acting fuse in series with the collector to protect against short circuits.
   • Consider adding a snubber circuit (RC network) across the collector and emitter to suppress voltage transients.

5. Testing:

   • Before mounting the transistor in a circuit, test it using a multimeter or a transistor tester to ensure it is not damaged.
   • Check for continuity and proper forward and reverse bias conditions.

6. Safety:

   • Always disconnect the power supply before making any changes to the circuit.
   • Use appropriate personal protective equipment (PPE) when handling high-voltage circuits.

By following these parameters and instructions, you can ensure reliable and efficient operation of the 2SJ74 transistor in your applications.

(For reference only)