Details

---

BUY DS2E-M-DC12V https://www.utsource.net/itm/p/12611492.html

Parameter	Description	Value
Model	Model Number	DS2E-M-DC12V
Type	Device Type	Electromagnetic Relay
Voltage	Operating Voltage	12V DC
Current	Coil Current	40mA
Power	Coil Power	0.48W
Contact Form	Contact Configuration	SPDT (Single Pole Double Throw)
Contact Rating	Contact Current	10A at 250V AC
Insulation Resistance	Insulation Between Contacts	>100M惟 at 500V DC
Dielectric Strength	Dielectric Strength Between Contacts	1000V AC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Humidity	Relative Humidity	5% to 95% RH (Non-condensing)
Life Expectancy	Mechanical Life	10 million operations
Electrical Life	Electrical Life (at rated load)	100,000 operations
Dimensions	Dimensions (L x W x H)	35mm x 20mm x 25mm
Weight	Weight	30g

Instructions

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Secure the relay using the provided mounting hardware to avoid mechanical stress on the terminals.

2. Wiring:

   • Connect the control circuit to the coil terminals (1 and 2).
   • Connect the load circuit to the contact terminals (3, 4, and 5) as per the contact form (SPDT).

3. Operation:

   • Apply the operating voltage (12V DC) to the coil terminals to energize the relay.
   • When the relay is energized, the normally open (NO) contact will close, and the normally closed (NC) contact will open.
   • When the relay is de-energized, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay with a soft, dry cloth to remove dust and debris.

5. Safety:

   • Do not exceed the rated voltage or current to avoid damage to the relay.
   • Ensure the relay is disconnected from the power source before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)