Details

---

BUY TLV61048DBV https://www.utsource.net/itm/p/12611528.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.62	-	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	10	-	渭A	Supply current at no load
Output Voltage Swing	VOUT	-	VDD-0.1	-	V	Output voltage swing to rail
Input Offset Voltage	VOS	-	1	-	mV	Maximum input offset voltage
Bandwidth	fBW	-	1.3	-	MHz	Small-signal bandwidth
Slew Rate	SR	-	1	-	V/渭s	Rate of change of output voltage
Input Bias Current	IB	-	0.01	-	渭A	Typical input bias current
Common-Mode Input Voltage	VCM	GND	-	VDD	V	Range of common-mode input voltages
Output Short-Circuit	OSC	-	-	-	-	Output short-circuit protection (Yes/No)

Instructions for Using TLV61048DBV

1. Supply Voltage Setup:

   • Ensure the supply voltage is within the specified range of 1.62V to 5.5V.

2. Powering the Device:

   • Connect the positive terminal of the power supply to the VDD pin and the negative terminal to the GND pin.

3. Input Connection:

   • Connect the signal source to the non-inverting (+) and inverting (-) input pins as required by your application.

4. Output Configuration:

   • Connect a load or next stage circuitry to the output pin. Be mindful of the output voltage swing limitations.

5. Handling and Placement:

   • Handle the device with care to avoid ESD damage.
   • Place the device on a PCB with adequate heat dissipation if necessary, considering the operational environment.

6. Short-Circuit Protection:

   • Verify that the output short-circuit protection feature is suitable for your application requirements.

7. Stability Considerations:

   • Ensure that any capacitive or resistive loads do not cause instability in the amplifier operation.

8. Testing:

   • After assembly, test the device under various conditions to ensure it meets the performance criteria specified in the datasheet.

(For reference only)