Details

---

BUY 2SA1553-O https://www.utsource.net/itm/p/12611535.html

Below is the parameter table and instructions for the 2SA1553-O transistor:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCE(max)	-	-	60	V
Emitter-Base Voltage	VEB(max)	-	-	6.0	V
Collector Current	IC(max)	-	-	1.5	A
Power Dissipation	PT(max)	-	-	125	mW	TA = 25掳C
DC Current Gain	hFE	100	400	800	-	IC = 150 mA, VCE = 10 V
Transition Frequency	fT	-	100	-	MHz
Storage Temperature Range	TSTG	-55	-	150	掳C
Operating Temperature Range	TA	-55	-	150	掳C

Instructions

1. Handling Precautions:

   • ESD Protection: The 2SA1553-O is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures such as wrist straps and grounded work surfaces.
   • Soldering: Use a soldering iron with a temperature not exceeding 300掳C and complete soldering within 3 seconds to avoid thermal damage.

2. Mounting:

   • Orientation: Ensure the correct orientation of the transistor during mounting. The pin configuration is typically as follows:
     • Pin 1 (E): Emitter
     • Pin 2 (B): Base
     • Pin 3 (C): Collector
   • Heat Sinking: For applications where the transistor will dissipate significant power, consider using a heat sink to maintain the junction temperature within safe limits.

3. Operating Conditions:

   • Voltage Limits: Do not exceed the maximum collector-emitter voltage (V_CE(max)) and emitter-base voltage (V_EB(max)).
   • Current Limits: Ensure that the collector current (I_C) does not exceed the maximum rating.
   • Power Dissipation: Keep the power dissipation (P_T) within the specified limits to prevent overheating.

4. Testing:

   • Initial Testing: Before integrating the transistor into a circuit, perform initial tests to verify its parameters such as h_FE and V_CE(sat).
   • Functional Testing: After assembly, conduct functional testing to ensure the transistor operates correctly under the intended conditions.

5. Storage:

   • Environmental Conditions: Store the 2SA1553-O in a dry, cool place away from direct sunlight and sources of heat.
   • Packaging: Keep the transistors in their original packaging until ready for use to protect against static and physical damage.

By following these guidelines, you can ensure the reliable operation and longevity of the 2SA1553-O transistor in your circuits.

(For reference only)