Details

---

BUY RT3352F https://www.utsource.net/itm/p/12611537.html

Parameter	Description	Value
Device Name	RT3352F
Type	System on Chip (SoC)
Process Technology	65nm CMOS
Package	QFN-48
Operating Voltage	Core Voltage: 0.9V - 1.1V
Frequency	CPU Clock: Up to 320 MHz
Memory	Internal SRAM: 64KB
Flash Memory	Supports external SPI Flash up to 16MB
Interfaces	USB 2.0 OTG, UART, I2C, SPI, SDIO, PWM, GPIO
Wi-Fi	IEEE 802.11 b/g/n
Security Features	WEP, WPA/WPA2, TKIP, AES
Temperature Range	Industrial: -40掳C to +85掳C
Pin Count	48

Instructions for Use:

1. Power Supply Requirements: Ensure the core voltage is maintained between 0.9V and 1.1V using an appropriate power supply circuit.
2. Clock Configuration: The internal oscillator can be used directly or an external crystal can be connected for more precise timing.
3. Peripheral Initialization: Initialize peripherals like UART, I2C, SPI, etc., through software configuration registers.
4. Wi-Fi Setup: Configure Wi-Fi settings using the provided SDK or AT commands.
5. External Flash: Connect an external SPI flash memory for storing firmware and data if required.
6. GPIO Handling: Configure GPIO pins as input/output based on application needs.
7. Thermal Management: Ensure adequate heat dissipation, especially under heavy processing loads.
8. Programming Interface: Use USB or UART interface for programming and debugging.
9. Reset Circuitry: Implement a reset circuit to ensure reliable operation during power-up or fault conditions.

For detailed setup and specific applications, refer to the official RT3352F datasheet and development guides.

(For reference only)