Details

---

BUY TXS0102DCTTG4 https://www.utsource.net/itm/p/12611583.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	1.62		3.6	V
Input Voltage (Max)	VI(max)	-0.5		4.6	V
Output Voltage (Max)	VO(max)	-0.5		4.6	V
Quiescent Current	IQ		2.7		渭A	VCC = 3.3V
Low-Level Input Current	II(L)	-1		-0.1	渭A	VIN = 0V
High-Level Input Current	II(H)	0.1		1	渭A	VIN = VCC
Propagation Delay (Low to High)	tPLH	2.8		4.5	ns	VCC = 3.3V, TA = 25掳C
Propagation Delay (High to Low)	tPHL	2.8		4.5	ns	VCC = 3.3V, TA = 25掳C

Instructions for TXS0102DCTTG4:

1. Power Supply Connection:

   • Connect the VCC pin to a supply voltage between 1.62V and 3.6V.
   • Ensure that the GND pin is connected to the system ground.

2. Signal Input/Output:

   • Connect the input signal to the IN pin.
   • The output signal will be available at the OUT pin.
   • The device can handle input/output voltages from -0.5V to 4.6V.

3. Handling Static Electricity:

   • This device is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection measures.

4. Operating Temperature Range:

   • The recommended operating temperature range is from -40掳C to 85掳C.

5. Installation:

   • Ensure that the PCB layout minimizes noise and interference.
   • Place decoupling capacitors close to the power supply pins to reduce noise.

6. Storage and Handling:

   • Store in a dry environment to prevent moisture damage.
   • Follow anti-static precautions during handling and installation.

7. Testing:

   • For accurate testing, ensure that the ambient temperature is maintained at 25掳C unless otherwise specified.
   • Use appropriate test equipment to measure propagation delays and current characteristics.

(For reference only)