Details

---

BUY XC022 https://www.utsource.net/itm/p/12611622.html

Parameter	Description	Value
Device Type	Low-Voltage CMOS Logic IC
Function	Dual SPDT Analog Switch
Supply Voltage (VDD)	Operating Voltage Range	1.65 V to 5.5 V
Input Voltage Range (VIN)	Input Voltage Range Relative to VSS	-0.3 V to VDD + 0.3 V
Channel Resistance (RON)	On-Resistance at VDD = 3.3 V, VON = 3.3 V, T = 25掳C	4 惟 (Max)
Leakage Current (ILK)	Leakage Current at VDD = 3.3 V, VON = 3.3 V, T = 25掳C	卤10 nA (Max)
Switching Time (tSW)	Switching Time from Off to On or On to Off at VDD = 3.3 V, T = 25掳C	20 ns (Typ)
Operating Temperature (Toper)	Operating Temperature Range	-40掳C to 85掳C
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to 150掳C
Package	Package Type	SOT-23-6, SC70-6

Instructions for Using XC022:

1. Power Supply:

   • Connect the VDD pin to the power supply voltage within the range of 1.65 V to 5.5 V.
   • Connect the VSS pin to ground.

2. Control Signals:

   • Use the control signals (IN1, IN2) to switch between the two channels.
   • When IN1 is high and IN2 is low, Channel 1 is selected.
   • When IN1 is low and IN2 is high, Channel 2 is selected.
   • When both IN1 and IN2 are low, both channels are off.

3. Analog Signal Connections:

   • Connect the analog input signals to the common terminal (COM).
   • Connect the output signals to the respective channel terminals (OUT1, OUT2).

4. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry environment within the temperature range of -65掳C to 150掳C.

5. Thermal Considerations:

   • Ensure proper heat dissipation if the device is used in high-power applications.
   • Use a heatsink if necessary, especially in high-temperature environments.

6. Electrostatic Discharge (ESD) Protection:

   • The device has built-in ESD protection, but it is recommended to follow standard ESD handling procedures during assembly and testing.

7. Testing and Verification:

   • Verify the functionality of the device using a known good signal source and a multimeter or oscilloscope.
   • Check the continuity and resistance between the pins to ensure proper connections.

8. Schematic and Layout:

   • Refer to the datasheet for recommended PCB layout guidelines to ensure optimal performance and reliability.

(For reference only)