Details

---

BUY ONSEMI LM324DR2G https://www.utsource.net/itm/p/12611639.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage (V+)		3.0		32	V
Input Offset Voltage	V+ = 5V, TA = 25掳C	-10		10	mV
Input Bias Current	V+ = 5V, TA = 25掳C	45		500	nA
Input Offset Current	V+ = 5V, TA = 25掳C	-10		10	nA
Large Signal Voltage Gain	RL = 10k惟, f = 1kHz	70			dB
Slew Rate	V+ = 15V, RL = 2k惟		0.5		V/渭s
Output Short-Circuit Duration	Continuous at TA = 25掳C
Operating Temperature Range	Industrial	-40		85	掳C
Storage Temperature Range		-65		150	掳C

Instructions for Use:

1. Power Supply Connection: Connect the power supply to the V+ and GND pins ensuring the voltage is within the specified range of 3.0V to 32V.

2. Input Signals: Apply input signals to the non-inverting (+) and inverting (-) inputs. Ensure that the input voltages do not exceed the supply voltage range to avoid damage.

3. Output Load: Connect the load resistor (RL) between the output pin and ground or another reference point. For optimal performance, keep RL within the recommended range.

4. Temperature Considerations: Operate the device within the industrial temperature range of -40掳C to 85掳C. Avoid exposing the device to temperatures outside this range to prevent malfunction or damage.

5. Short-Circuit Protection: The device has internal short-circuit protection on the output. However, it is advisable to limit the duration of any short circuits to minimize potential stress on the device.

6. Handling Precautions: Handle the device with care to avoid electrostatic discharge (ESD). Use proper ESD precautions when handling or soldering the component.

7. Mounting: Ensure the device is mounted securely on the PCB with appropriate soldering techniques to ensure reliable operation and thermal management.

For detailed specifications and advanced applications, refer to the official ONSEMI LM324DR2G datasheet.

(For reference only)