Details

---

BUY 20FL2C https://www.utsource.net/itm/p/12611652.html

Parameter	Description	Value
Part Number	Device Identifier	20FL2C
Package	Encapsulation Type	SOIC-8
Operating Voltage (V)	Supply Voltage Range	1.8 to 5.5 V
Operating Current (mA)	Typical Operating Current	1.5 mA
Storage Temperature (掳C)	Temperature Range for Storage	-65 to 150 掳C
Operating Temperature (掳C)	Temperature Range for Operation	-40 to 85 掳C
Output Configuration	Output Type	Push-Pull
Input Capacitance (pF)	Capacitance at Input Pin	10 pF
Output Capacitance (pF)	Capacitance at Output Pin	5 pF
Maximum Output Current (mA)	Maximum Current at Output Pin	20 mA
Rise Time (ns)	Time to Rise from 10% to 90%	10 ns
Fall Time (ns)	Time to Fall from 90% to 10%	10 ns
Propagation Delay (ns)	Delay Time from Input to Output	15 ns

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 1.8 to 5.5 V.
   • Connect the power supply to the VCC and GND pins.

2. Input Signal:

   • Apply the input signal to the appropriate input pin.
   • Ensure the input signal does not exceed the supply voltage or go below ground.

3. Output Signal:

   • The output signal will be available on the output pin.
   • Do not exceed the maximum output current of 20 mA to avoid damaging the device.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40 to 85 掳C.
   • Store the device in an environment with temperatures between -65 to 150 掳C.

5. Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions.

6. Mounting:

   • Solder the device to the PCB using recommended soldering techniques.
   • Ensure proper alignment and secure mounting to prevent mechanical stress.

7. Testing:

   • After mounting, test the device to ensure it meets the specified performance parameters.
   • Use a multimeter or oscilloscope to verify the correct operation.

(For reference only)