Details

---

BUY 2SC1810 https://www.utsource.net/itm/p/12611656.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	40	V
Collector-Base Voltage	VCBO	-	-	50	V
Emitter-Base Voltage	VEBO	-	-	6	V
Collector Current	IC	-	-	1	A
Base Current	IB	-	-	0.1	A
Power Dissipation	PD	-	-	625	mW
Operating Temperature	Toper	-55	-	150	掳C
Storage Temperature	Tstg	-65	-	200	掳C

Instructions for Use:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings listed to prevent damage.
   • Use appropriate heat sinks if operating near maximum power dissipation.

2. Mounting:

   • Ensure proper alignment of the transistor leads to the PCB.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.

3. Biasing:

   • Ensure the base current (IB) is sufficient to drive the collector current (IC) as required by the application.
   • Use a base resistor to limit the base current and protect the transistor from overdrive.

4. Thermal Management:

   • If the transistor is expected to dissipate significant power, use a heatsink to maintain the junction temperature within safe limits.
   • Refer to the thermal resistance data provided by the manufacturer for specific heatsink recommendations.

5. Testing:

   • Before final assembly, test the transistor using a multimeter or a dedicated transistor tester to ensure it meets the specified parameters.
   • Check for short circuits and open circuits between the pins.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

7. Electrostatic Discharge (ESD) Protection:

   • Use ESD-safe practices when handling the transistor to avoid damage from static electricity.
   • Ground yourself and your equipment before touching the component.

(For reference only)