Details

---

BUY 2SC4052 https://www.utsource.net/itm/p/12611658.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	30	V
Collector-Base Voltage	VCBO	-	-	30	V
Emitter-Base Voltage	VEBO	-	-	5	V
Collector Current	IC	-	150	-	mA
Base Current	IB	-	10	-	mA
Power Dissipation	PT	-	-	625	mW
Operating Temperature	TOP	-55	-	150	掳C
Storage Temperature	TS	-65	-	150	掳C
Transition Frequency	fT	-	300	-	MHz

Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the transistor on a heatsink if operating at high power levels.
   • Use thermal compound between the transistor and the heatsink to improve heat transfer.

2. Biasing:

   • Apply the base current (I_B) carefully to avoid exceeding the maximum collector current (I_C).
   • Use a current-limiting resistor in series with the base to prevent excessive base current.

3. Voltage Ratings:

   • Do not exceed the maximum collector-emitter voltage (V_CEO), collector-base voltage (V_CBO), or emitter-base voltage (V_EBO).

4. Power Dissipation:

   • Keep the power dissipation (P_T) within the specified limits to avoid overheating and potential damage to the transistor.
   • Use a heatsink if the power dissipation is expected to be close to the maximum rating.

5. Temperature:

   • Operate the transistor within the specified operating temperature range (T_OP) to ensure reliable performance.
   • Store the transistor within the storage temperature range (T_S) to prevent damage.

6. Handling:

   • Handle the transistor with care to avoid mechanical stress and damage.
   • Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

7. Testing:

   • Test the transistor under controlled conditions to verify its parameters before integrating it into a circuit.
   • Use a multimeter or a transistor tester to check the continuity and hFE (current gain) of the transistor.

8. Soldering:

   • Solder the transistor quickly to avoid overheating the junction.
   • Use a heat sink clip on the leads during soldering to protect the transistor from excessive heat.

(For reference only)