Details

---

BUY M29F800DT-70N1 https://www.utsource.net/itm/p/12611671.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		3.6	V
Standby Current	Icc	Vcc = 3.0V, Standby		10		渭A
Active Current	Icc	Vcc = 3.0V, Active		100		mA
Access Time	tacc	Vcc = 3.0V, TA = 25掳C		70		ns
Page Program Time	tpp	Vcc = 3.0V, TA = 25掳C		300		渭s
Block Erase Time	tbe	Vcc = 3.0V, TA = 25掳C		4		s
Data Retention			10			years
Operating Temperature	TA		-40		85	掳C
Storage Temperature	TSTG		-65		150	掳C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The device operates optimally at 3.0V.

2. Current Consumption:

   • In standby mode, the current consumption (Icc) should not exceed 10渭A.
   • In active mode, the current consumption can reach up to 100mA.

3. Access Time:

   • The access time (tacc) is 70ns under typical conditions (Vcc = 3.0V, TA = 25掳C).

4. Programming and Erasing:

   • Page program time (tpp) is 300渭s.
   • Block erase time (tbe) is 4 seconds.
   • Ensure that the programming and erasing operations are performed within these times to avoid data corruption.

5. Data Retention:

   • The device retains data for at least 10 years under normal operating conditions.

6. Temperature Range:

   • The operating temperature (TA) range is from -40掳C to 85掳C.
   • The storage temperature (TSTG) range is from -65掳C to 150掳C.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool environment to ensure long-term reliability.

8. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and connections.

9. Programming and Erasing Cycles:

   • The device supports multiple programming and erasing cycles, but the exact number depends on the usage and environmental conditions.

10. Testing and Validation:

    • Perform thorough testing and validation of the device in your application to ensure it meets all performance requirements.

(For reference only)