Details

---

BUY 2SK727 https://www.utsource.net/itm/p/12611713.html

Parameter	Symbol	Value	Unit
Drain-Source Voltage	VDS	450	V
Gate-Source Voltage	VGS	卤20	V
Continuous Drain Current	ID	3.5	A
Pulse Drain Current (t=10ms)	IDM	8	A
Power Dissipation	PD	90	W
Junction Temperature	TJ	-55 to +150	掳C
Storage Temperature	TSTG	-55 to +150	掳C
Total Gate Charge	QG	150	nC
Input Capacitance	Ciss	2500	pF
Output Capacitance	Coss	400	pF
Reverse Transfer Capacitance	Crss	650	pF

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the device to temperatures outside the specified range.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Apply thermal paste or a thermal pad between the device and the heatsink to improve heat dissipation.
   • Tighten the mounting screws to the recommended torque to ensure good thermal contact without damaging the device.

3. Biasing:

   • Set the gate-source voltage (VGS) within the specified limits to avoid damage.
   • Use appropriate gate drive circuits to ensure stable operation.

4. Operation:

   • Monitor the drain current (ID) to ensure it does not exceed the continuous or pulse ratings.
   • Keep the power dissipation (PD) within the specified limit to prevent overheating.
   • Use a heatsink if necessary to maintain the junction temperature (TJ) within the safe operating range.

5. Storage:

   • Store the device in a dry, cool place within the storage temperature range.
   • Avoid exposure to high humidity and corrosive environments.

6. Testing:

   • Use a suitable testing setup to verify the device parameters before installation.
   • Follow standard testing procedures to ensure accurate measurements.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper biasing, correct connections, and adequate cooling.
   • Replace the device if it shows signs of physical damage or if it fails to meet the specified parameters.

(For reference only)