Details

---

BUY 74HCT7007 https://www.utsource.net/itm/p/12611720.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous operation	2.0	-	6.0	V
Input Voltage (High)	VIH	VIL = 0V	3.15	-	VCC	V
Input Voltage (Low)	VIL	VIH = VCC	0	-	1.35	V
Output Voltage (High)	VOH	IOL = 0mA	2.4	-	VCC - 0.1	V
Output Voltage (Low)	VOL	IOL = 4mA	0	-	0.4	V
Input Leakage Current	IIL	VI = 0V to VCC	-1	-	1	渭A
Output Leakage Current	IOL	VO = 0V	-100	-	100	渭A
Propagation Delay Time	tp	VCC = 5V, TA = 25掳C	-	12	-	ns
Power Dissipation	PD	Per Package	-	-	100	mW

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the range of 2.0V to 6.0V for reliable operation.
2. Input Voltages:
   • High input voltage (V_IH) should be at least 3.15V when V_CC is 5V.
   • Low input voltage (V_IL) should not exceed 1.35V when V_CC is 5V.
3. Output Voltages:
   • High output voltage (V_OH) should be at least 2.4V when V_CC is 5V.
   • Low output voltage (V_OL) should not exceed 0.4V when sinking 4mA.
4. Current Ratings:
   • Input leakage current (I_IL) should not exceed 卤1渭A.
   • Output leakage current (I_OL) should not exceed 卤100渭A.
5. Propagation Delay: The typical propagation delay time is 12ns at 5V supply voltage and 25掳C ambient temperature.
6. Power Dissipation: The maximum power dissipation per package is 100mW.

Additional Notes:

• Ensure proper decoupling capacitors are used near the power pins to stabilize the supply voltage.
• Avoid exceeding the maximum ratings to prevent damage to the device.
• For best performance, operate the device within the recommended operating conditions.

(For reference only)