Details

---

BUY TDA7233D013TR https://www.utsource.net/itm/p/12611722.html

Parameter	Description	Value	Unit
Supply Voltage (Vcc)	Operating supply voltage range	4.5 to 18	V
Quiescent Current	Current consumption at no load	25	mA
Output Power (POM)	Maximum output power into 8惟 load	2 x 10	W
Frequency Response	Flat frequency response range	20 to 20,000	Hz
Signal-to-Noise Ratio (SNR)	Ratio of signal to noise level	95	dB
Total Harmonic Distortion (THD)	Distortion at rated output power	0.05	%
Input Sensitivity	Voltage required at input for rated output	200	mV
Input Impedance	Resistance to AC signals at input	47	k惟
Thermal Shutdown Temperature	Temperature at which the device shuts down to prevent damage	150	掳C
Operating Temperature Range	Ambient temperature range for operation	-40 to 85	掳C
Package Type	Physical package of the component	DIP-8	-

Instructions:

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Input Signal Connection:

   • Connect the audio signal source to the IN+ and IN- pins.
   • Ensure the input signal is within the specified input sensitivity range to avoid distortion.

3. Output Connection:

   • Connect the speaker terminals to the OUT+ and OUT- pins.
   • Use speakers with an impedance of 8惟 or higher to match the output power specifications.

4. Thermal Management:

   • Ensure adequate heat dissipation by mounting the component on a heatsink if operating near maximum power levels.
   • Monitor the ambient temperature to ensure it remains within the specified operating range.

5. Protection Circuits:

   • The TDA7233D013TR includes thermal shutdown and short-circuit protection.
   • In case of overheating, the device will automatically shut down to prevent damage.

6. Storage and Handling:

   • Store the component in a dry, cool place.
   • Handle with care to avoid static discharge and physical damage.

(For reference only)