Details

---

BUY L46R https://www.utsource.net/itm/p/12611731.html

Parameter	Description	Value
Part Number	Part number of the device	L46R
Type	Type of component	Inductor
Inductance	Inductance value	4.6 渭H
Tolerance	Tolerance of inductance	卤20%
DC Resistance	DC resistance (max)	0.035 惟
Rated Current	Maximum current without overheating	1.8 A
Saturation Current	Current at which inductance drops by 30%	3.6 A
Operating Temperature	Range of operating temperatures	-40掳C to +125掳C
Case Size	Physical dimensions of the component	6.0 x 6.0 mm
Height	Height of the component	2.3 mm
Mounting Type	Method of mounting	Surface Mount
Material	Core material	Ferrite

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to corrosive environments.

2. Soldering:

   • Preheat the board to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature of 260掳C to 300掳C.
   • Soldering time should not exceed 3 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10掳C to +40掳C.
   • Humidity should be kept below 60%.

4. Testing:

   • Use a multimeter to check the DC resistance.
   • Measure inductance using an LCR meter.
   • Ensure the component is not damaged during testing.

5. Application:

   • Suitable for power supply filtering, EMI suppression, and energy storage in switching circuits.
   • Ensure the operating current does not exceed the rated current to prevent overheating and potential failure.

(For reference only)