Details

---

BUY TJA1020T/N1 https://www.utsource.net/itm/p/12611766.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	5.0	5.5	V	Operating voltage range
Standby Current	ICC(SBY)	-	60	80	渭A	Quiescent current in standby mode
Active Current	ICC(ACT)	-	10	15	mA	Quiescent current in active mode
Output High-Level Voltage	VOH	2.4	-	VCC-0.3	V	Voltage at output when high
Output Low-Level Voltage	VOL	0	-	0.4	V	Voltage at output when low
Input Voltage Range	VIN	-0.5	-	VCC+0.5	V	Input voltage range
Differential Input Voltage	VIDIFF	-12	-	12	V	Maximum differential input voltage
Common-Mode Input Voltage	VICM	-2	-	14	V	Common-mode input voltage range
Data Rate	fDATA	-	1	-	Mbps	Maximum data rate
Propagation Delay	tPD	15	-	25	ns	Propagation delay from input to output
Rise Time	tR	20	-	40	ns	Time for output to rise from 10% to 90% of VOH
Fall Time	tF	20	-	40	ns	Time for output to fall from 90% to 10% of VOH
Operating Temperature	TOP	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Using TJA1020T/N1

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Connect the power supply to the V_CC pin and ground to the GND pin.

2. Signal Connections:

   • Connect the input signal to the IN pin.
   • Connect the output signal to the OUT pin.
   • Ensure the common-mode input voltage (V_ICM) is within the range of -2V to 14V.

3. Data Rate:

   • The device supports a maximum data rate of 1 Mbps. Ensure the data signals are within this range for reliable operation.

4. Temperature Considerations:

   • The operating temperature range is -40掳C to 125掳C. Ensure the device is used within these limits to avoid damage.
   • The storage temperature range is -65掳C to 150掳C. Store the device in a suitable environment to prevent degradation.

5. Standby Mode:

   • To enter standby mode, set the enable pin (EN) to a low state. The quiescent current will drop to the standby current level (60 to 80 渭A).

6. Active Mode:

   • To enter active mode, set the enable pin (EN) to a high state. The quiescent current will increase to the active current level (10 to 15 mA).

7. Protection:

   • The device has built-in protection against differential input voltages up to 卤12V and common-mode input voltages up to 14V.
   • Ensure the input signals do not exceed these limits to avoid damage to the device.

8. Mounting and Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal damage.

By following these instructions, you can ensure optimal performance and reliability of the TJA1020T/N1 in your application.

(For reference only)