Details

---

BUY 74HC365AP https://www.utsource.net/itm/p/12611790.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	6.0	V	-
Input Low Voltage	VIL	-	-	1.5	V	VCC = 4.5V to 5.5V
Input High Voltage	VIH	3.5	-	-	V	VCC = 4.5V to 5.5V
Output Low Voltage	VOL	-	0.1	0.2	V	IOL = 8 mA, VCC = 4.5V to 5.5V
Output High Voltage	VOH	4.4	-	-	V	IOH = -0.4 mA, VCC = 4.5V to 5.5V
Input Leakage Current	IIL	-	-	1.0	渭A	VCC = 4.5V to 5.5V
Output Leakage Current	IOL	-	-	5.0	渭A	VCC = 4.5V to 5.5V
Propagation Delay Time	tpd	-	12	-	ns	VCC = 5V, TA = 25掳C, typical value
Power Consumption per Gate	Pmax	-	-	1.0	mW	VCC = 5V, f = 1 MHz
Operating Temperature Range	TA	-40	-	85	掳C	-

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V.
   • For optimal performance, use a supply voltage between 4.5V and 5.5V.

2. Input Levels:

   • Inputs should be driven to either V_IL (low) or V_IH (high) levels.
   • V_IL should not exceed 1.5V when V_CC is between 4.5V and 5.5V.
   • V_IH should be at least 3.5V when V_CC is between 4.5V and 5.5V.

3. Output Levels:

   • When driving a load, ensure that the output current does not exceed the specified limits.
   • V_OL should be less than or equal to 0.2V when sinking 8mA.
   • V_OH should be at least 4.4V when sourcing -0.4mA.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 12ns at V_CC = 5V and T_A = 25掳C.
   • This value can vary with different supply voltages and temperatures.

5. Power Consumption:

   • Each gate consumes a maximum of 1.0mW at V_CC = 5V and a frequency of 1 MHz.
   • Ensure adequate heat dissipation if operating at high frequencies or in high ambient temperatures.

6. Operating Temperature:

   • The device is rated to operate from -40掳C to 85掳C.
   • Avoid exceeding these temperature limits to prevent damage or reduced performance.

7. Handling Precautions:

   • The 74HC365AP is sensitive to electrostatic discharge (ESD).
   • Use proper ESD protection measures during handling and installation.

8. Mounting and Soldering:

   • Follow standard surface mount technology (SMT) guidelines for mounting and soldering.
   • Ensure that the soldering temperature and time do not exceed the maximum ratings specified in the datasheet.

By adhering to these parameters and instructions, you can ensure reliable operation of the 74HC365AP in your circuits.

(For reference only)