Details

---

BUY HCPL-6N139 https://www.utsource.net/itm/p/12611805.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Forward Current	IF	-	16	20	mA	Maximum forward current through the LED
Forward Voltage	VF	1.1	1.3	1.5	V	Forward voltage at IF = 20mA
Reverse Voltage	VR	-	-	5	V	Maximum reverse voltage across the LED
Output Supply Voltage	VCC	4.5	-	20	V	Operating supply voltage range
Output Leakage Current	IOL	-	1	10	渭A	Output leakage current at VCC = 20V, T_A = 85掳C
Propagation Delay Time	tpd	5	9	15	ns	Propagation delay time
Pulse Width Distortion	tpw	-	1	3	ns	Pulse width distortion
Rise Time	tr	5	7	10	ns	Rise time
Fall Time	tf	5	7	10	ns	Fall time
Common Mode Transient Immunity	CMTI	25	-	-	kV/渭s	Common mode transient immunity
Operating Temperature	T_op	-40	-	85	掳C	Operating temperature range
Storage Temperature	T_stg	-55	-	125	掳C	Storage temperature range

Instructions for HCPL-6N139:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.5V to 20V.

2. LED Drive:

   • The LED should be driven with a current between 16mA and 20mA for optimal performance. Avoid exceeding these limits to prevent damage.

3. Output Handling:

   • Be aware of the output leakage current which can reach up to 10渭A under extreme conditions (VCC = 20V, T_A = 85掳C).

4. Timing Considerations:

   • Take into account the propagation delay time (tpd), rise time (tr), and fall time (tf) when designing circuits that depend on precise timing.

5. Environmental Conditions:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance. Store it in environments ranging from -55掳C to 125掳C.

6. Electrostatic Discharge (ESD) Sensitivity:

   • Handle the device with care as it may be sensitive to ESD; use appropriate precautions during handling and installation.

7. Common Mode Transient Immunity (CMTI):

   • For applications where high-speed switching or noise is present, consider the CMTI rating to ensure robust operation.

8. Mounting and Connections:

   • Ensure proper mounting and connection practices to maintain electrical integrity and thermal management.

(For reference only)