Details

---

BUY TEA2017AAT/2 https://www.utsource.net/itm/p/12611807.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	4.5	5.0	5.5	V
Standby Current	ISB		2.5		mA
Operating Temperature	Toper	-40		85	掳C
Storage Temperature	Tstg	-65		150	掳C
Output Power	Pout		1.5	2.5	W
Quiescent Current	IQ		7		mA
PSRR at 1 kHz			60		dB
THD+N at 1W, 1kHz			0.5		%

Instructions for TEA2017AAT/2:

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage or improper operation.

2. Installation:

   • Mount the device on a suitable heatsink if operating near maximum power output to ensure proper heat dissipation.

3. Input Signal:

   • Connect the input signal to the designated pin, ensuring that the signal level does not exceed the recommended input voltage.

4. Output Connections:

   • Connect the speaker or load directly to the output terminals, making sure the impedance matches the specified load requirements.

5. Standby Mode:

   • To activate standby mode, pull the appropriate control pin low. This reduces the current consumption to approximately 2.5mA.

6. Operating Environment:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.

7. Storage:

   • When storing the device, keep it within the temperature range of -65掳C to +150掳C.

8. Troubleshooting:

   • If encountering high distortion levels, check the input signal integrity and ensure all connections are secure.
   • For thermal issues, verify proper heatsinking and ambient temperature conditions.

(For reference only)