Details

---

BUY SW50212 https://www.utsource.net/itm/p/12611821.html

Parameter	Description	Value
Part Number	SW50212	-
Function	Step-up DC-DC Converter	-
Input Voltage	Operating Range	2.7V to 5.5V
Output Voltage	Adjustable Output	3.3V to 12V
Output Current	Maximum Continuous Current	2A
Efficiency	Typical Efficiency	Up to 95%
Switching Frequency	Internal Fixed Frequency	1.2MHz
Protection Features	Overcurrent Protection, Overvoltage Protection	Yes
Operating Temperature	Storage and Operating Temperature Range	-40掳C to 85掳C
Package Type	SOT-23-6	-
Quiescent Current	Shutdown Mode	<1渭A

Instructions for Use

1. Input Connection:

   • Connect the input power supply (2.7V to 5.5V) to the VIN pin.
   • Ensure the input voltage is within the specified range to avoid damage.

2. Output Configuration:

   • Adjust the output voltage using the external feedback resistor network connected to the FB pin.
   • Refer to the datasheet for specific resistor values to achieve the desired output voltage.

3. Inductor Selection:

   • Choose an inductor with a value between 10渭H and 22渭H for optimal performance.
   • Ensure the inductor can handle the maximum current (2A).

4. Capacitor Selection:

   • Use a ceramic capacitor (10渭F to 22渭F) for the input and output capacitors.
   • Place the capacitors as close as possible to the VIN and VOUT pins to minimize noise.

5. Protection:

   • The device includes built-in overcurrent and overvoltage protection.
   • Do not exceed the maximum output current or voltage ratings to prevent damage.

6. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Consider adding a heatsink if necessary.

7. Layout Guidelines:

   • Keep the PCB layout compact and minimize trace lengths to reduce parasitic inductance and capacitance.
   • Ground planes should be used to provide a low-impedance path for return currents.

8. Testing:

   • Before finalizing the design, test the circuit under various load conditions to ensure stable operation.
   • Verify the output voltage and efficiency meet the design requirements.

9. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid static damage.

(For reference only)