Details

---

BUY OP297G https://www.utsource.net/itm/p/12611829.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating	4.5	-	36	V
Input Voltage Range	VI	Relative to Ground	-0.3	-	VCC + 0.3	V
Output Voltage Swing	VO	Load = 10 k惟, VCC = 15 V	0.05	-	14.95	V
Quiescent Current	IQ	VCC = 15 V	-	2.8	-	mA
Input Offset Voltage	VOS	VCC = 15 V, TA = 25掳C	-	5	25	渭V
Input Bias Current	IB	VCC = 15 V, TA = 25掳C	-	10	-	nA
Input Offset Current	IOS	VCC = 15 V, TA = 25掳C	-	1	-	nA
Common-Mode Rejection Ratio	CMRR	VCC = 15 V, TA = 25掳C, f = 60 Hz	110	-	-	dB
Power-Supply Rejection Ratio	PSRR	VCC = 15 V, TA = 25掳C, f = 60 Hz	100	-	-	dB
Slew Rate	SR	VCC = 15 V, TA = 25掳C	0.3	-	-	V/渭s
Gain Bandwidth Product	GBP	VCC = 15 V, TA = 25掳C	-	9	-	MHz

Instructions for Using OP297G:

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 4.5 V to 36 V.
   • Connect the positive supply to V_CC and the negative supply to ground.

2. Input Voltage:

   • The input voltage should be within the range of -0.3 V to V_CC + 0.3 V to avoid damage to the device.

3. Output Voltage:

   • The output voltage can swing from 0.05 V to 14.95 V when the load is 10 k惟 and V_CC is 15 V.

4. Quiescent Current:

   • The typical quiescent current is 2.8 mA at V_CC = 15 V.

5. Input Offset Voltage:

   • The input offset voltage is typically 5 渭V at V_CC = 15 V and T_A = 25掳C.

6. Input Bias Current:

   • The input bias current is typically 10 nA at V_CC = 15 V and T_A = 25掳C.

7. Input Offset Current:

   • The input offset current is typically 1 nA at V_CC = 15 V and T_A = 25掳C.

8. Common-Mode Rejection Ratio (CMRR):

   • The CMRR is at least 110 dB at V_CC = 15 V, T_A = 25掳C, and f = 60 Hz.

9. Power-Supply Rejection Ratio (PSRR):

   • The PSRR is at least 100 dB at V_CC = 15 V, T_A = 25掳C, and f = 60 Hz.

10. Slew Rate:

    • The slew rate is 0.3 V/渭s at V_CC = 15 V and T_A = 25掳C.

11. Gain Bandwidth Product (GBP):

    • The typical gain bandwidth product is 9 MHz at V_CC = 15 V and T_A = 25掳C.

12. Handling and Storage:

    • Handle the OP297G with care to avoid static discharge.
    • Store in a dry, cool place away from direct sunlight.

13. Mounting:

    • Follow standard surface mount technology (SMT) procedures for mounting the OP297G on a PCB.
    • Ensure proper thermal management if the device will be operating at high power levels or in high ambient temperatures.

(For reference only)