Details

---

BUY 2SC1515-K https://www.utsource.net/itm/p/12611850.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Collector-Emitter Voltage	VCEO	-	-	80	V	IC = 150mA, TA = 25掳C
Emitter-Base Voltage	VEBO	-	-	5	V	IEBO = 5mA, TA = 25掳C
Collector-Base Voltage	VCBO	-	-	80	V	ICBO = 10渭A, TA = 25掳C
Collector Current	IC	-	-	150	mA	VCE = 30V, TA = 25掳C
Base Current	IB	-	-	15	mA	VBE = 5V, TA = 25掳C
DC Current Gain	hFE	100	300	700	-	IC = 10mA, VCE = 10V, TA = 25掳C
Transition Frequency	fT	-	300	-	MHz	IC = 10mA, VCE = 10V, TA = 25掳C
Storage Temperature Range	TSTG	-55	-	150	掳C	-
Operating Temperature Range	TA	-55	-	150	掳C	-

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the 2SC1515-K to excessive mechanical stress or thermal shock.
   • Use appropriate static discharge protection when handling the device.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Apply thermal paste if necessary to improve heat dissipation.
   • Tighten the mounting screws to the recommended torque to avoid damage.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) is within the specified range to prevent damage.
   • Use a current-limiting resistor to control the base current (I_B).

4. Operational Conditions:

   • Do not exceed the maximum ratings for collector-emitter voltage (V_CEO), collector current (I_C), and power dissipation (P_TOT).
   • Operate the device within the specified temperature range to ensure reliable performance.

5. Testing:

   • Use a multimeter to check the continuity and resistance values before connecting the transistor to a circuit.
   • Perform a simple test circuit to verify the functionality of the transistor.

6. Storage:

   • Store the 2SC1515-K in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the devices in their original packaging until ready for use to protect against static discharge.

(For reference only)