Details

---

BUY MB4204 https://www.utsource.net/itm/p/12611863.html

Parameter	Description	Value
Type	Full Bridge Rectifier	-
Package	DIP-4	-
Forward Voltage (Vf)	Maximum Forward Voltage Drop per Element	1.0V (Typical)
Reverse Voltage (Vr)	Peak Reverse Voltage	400V
Average Rectified Output Current (Io)	Continuous DC Output Current	1A
Peak Surge Current (Ifsm)	Non-Repetitive Peak Forward Surge Current	30A
Operating Temperature (Tj)	Junction Operating Temperature Range	-55掳C to +150掳C
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to +150掳C
Thermal Resistance (Rthjc)	Junction-to-Case Thermal Resistance	20掳C/W
Isolation Voltage (Viorm)	Input-Output Isolation Voltage	1500Vrms (1min)

Instructions for Use

1. Mounting:

   • Ensure the rectifier is mounted on a heat sink if operating at high currents to maintain junction temperature within the specified range.
   • Use proper mounting hardware to secure the device and ensure good thermal contact with the heat sink.

2. Wiring:

   • Connect the input AC voltage to the two diagonal terminals (typically marked as ~ or AC).
   • Connect the positive output terminal (marked + or Anode) to the positive side of the load.
   • Connect the negative output terminal (marked - or Cathode) to the negative side of the load.

3. Surge Current:

   • The MB4204 can handle peak surge currents up to 30A, but these should be non-repetitive to avoid damage.
   • Ensure that any inrush current limiting measures are in place if the rectifier is used in circuits with large capacitors or inductive loads.

4. Temperature Management:

   • Monitor the ambient temperature and ensure it does not exceed the maximum operating temperature of 150掳C.
   • Use thermal management techniques such as forced air cooling or additional heat sinks if necessary.

5. Isolation:

   • Ensure that the isolation voltage rating of 1500Vrms is not exceeded to prevent breakdown and potential safety hazards.

6. Storage:

   • Store the MB4204 in a dry environment within the temperature range of -65掳C to +150掳C to maintain its performance and reliability.

7. Handling:

   • Handle the rectifier with care to avoid mechanical stress, which can lead to internal damage.
   • Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

By following these guidelines, you can ensure optimal performance and longevity of the MB4204 full bridge rectifier in your application.

(For reference only)