Details

---

BUY FA5504S https://www.utsource.net/itm/p/12611874.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Current	Icc	-	100	300	渭A	Vcc = 5V, No Load
Output Current	Iout	-	20	100	mA	Vcc = 5V
Input Voltage	Vin	-	-	40	V	Maximum
Output Voltage	Vout	-	-	5.5	V
Dropout Voltage	Vdo	-	0.2	0.5	V	Iout = 100mA, Vcc = 5V
Thermal Shutdown	TSD	-	160	-	掳C
Storage Temperature	Tstg	-40	-	85	掳C

Instructions for Use

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V. The device may not function correctly outside this range.

2. Operating Current (Icc):

   • The typical operating current is 100 渭A at 5V with no load. Ensure your power supply can provide sufficient current.

3. Output Current (Iout):

   • The device can provide up to 100 mA of output current. Ensure the load does not exceed this limit to avoid damage.

4. Input Voltage (Vin):

   • The maximum input voltage is 40V. Exceeding this can cause damage to the device.

5. Output Voltage (Vout):

   • The output voltage should be set according to the application requirements, but it must not exceed 5.5V.

6. Dropout Voltage (Vdo):

   • The dropout voltage is the difference between the input and output voltages when the device is regulating. It is typically 0.2V to 0.5V at 100mA output current and 5V supply.

7. Thermal Shutdown (TSD):

   • The device will shut down if the temperature exceeds 160掳C to prevent damage. Ensure proper heat dissipation.

8. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -40掳C to 85掳C.

Additional Notes:

• Always use appropriate decoupling capacitors on the input and output to ensure stable operation.
• Ensure the PCB layout minimizes inductance and resistance in the power paths.
• Refer to the datasheet for detailed information and specific application circuits.

(For reference only)