Details

---

BUY C2M0040120D https://www.utsource.net/itm/p/12611882.html

Parameter	Symbol	Min	Typ	Max	Unit
Breakdown Voltage	BV	-	-	650	V
Continuous Drain Current	ID	-	-	40	A
Pulsed Drain Current	IDpeak	-	-	80	A
Gate-Source Voltage	VGS	-20	-	15	V
Threshold Voltage	Vth	3.0	4.0	5.0	V
On-State Resistance	RDS(on)	-	45	-	m惟
Total Gate Charge	Qg	-	110	-	nC
Input Capacitance	Cin	-	1800	-	pF
Output Capacitance	Cout	-	90	-	pF
Reverse Transfer Capacitance	Crss	-	170	-	pF
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical damage.
   • Ensure proper heat sinking to manage junction temperature.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short, low-inductance leads to minimize parasitic effects.

3. Biasing:

   • Apply the gate-source voltage (VGS) within the specified range to ensure reliable operation.
   • Avoid exceeding the maximum gate-source voltage to prevent damage.

4. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it does not exceed the maximum rating.
   • Use appropriate cooling methods such as heatsinks or forced air cooling.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive drain current (ID).

6. Pulsed Operation:

   • For pulsed applications, ensure that the pulsed drain current (IDpeak) does not exceed the maximum rating.
   • Consider the thermal implications of pulsed operation.

7. Storage:

   • Store the device in a dry, cool environment to prevent degradation.
   • Follow recommended storage temperature limits to avoid damage.

8. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Use recommended test circuits and procedures to ensure accurate results.

9. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

10. Documentation:

    • Refer to the datasheet and application notes for detailed information and specific use cases.

(For reference only)