Details

---

BUY MCH6306-TL-E https://www.utsource.net/itm/p/12611885.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	V_IN	Operating	4.5		20	V
Output Voltage	V_OUT	Adjustable		1.2	18	V
Output Current	I_OUT	Continuous		3		A
Switching Frequency	f_SW			600		kHz
Quiescent Current	I_Q	V_IN = 12V, No Load		70		渭A
Shutdown Current	I_SD	V_IN = 12V		1		渭A
Efficiency	畏	V_IN = 12V, I_OUT = 3A		92		%
Thermal Shutdown	T_SD			160		掳C
Package Type				SOIC-8

Instructions for MCH6306-TL-E:

1. Power Supply Connection: Connect the input voltage (V_IN) within the specified range of 4.5V to 20V.
2. Output Configuration: Set the output voltage (V_OUT) using external resistors according to the formula provided in the datasheet.
3. Inductor Selection: Choose an inductor value that matches the switching frequency and desired output current.
4. Capacitor Selection: Use capacitors with low ESR for both input and output to ensure stability and minimize ripple.
5. Thermal Considerations: Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures to avoid thermal shutdown.
6. Enable/Shutdown Pin: Apply a logic high to enable the device; apply a logic low or leave open for shutdown mode.
7. PCB Layout: Follow recommended PCB layout guidelines to optimize performance and reliability.
8. Protection Features: The device includes overcurrent and thermal protection features which are automatically activated under fault conditions.

(For reference only)