Details

---

BUY FGH50T65SQD https://www.utsource.net/itm/p/12611901.html

Parameter	Symbol	Min	Typ	Max	Unit
Breakdown Voltage	V(BR)DSS	-	650	-	V
Forward Transconductance	gfs	-	12	-	S
Total Gate Charge	Qg	-	84	-	nC
Input Capacitance	Ciss	-	1350	-	pF
Output Capacitance	Coss	-	270	-	pF
Reverse Transfer Capacitance	Crss	-	110	-	pF
Continuous Drain Current	ID	-	50	-	A
Pulse Drain Current	ICM	-	150	-	A
Power Dissipation	Ptot	-	250	-	W
Junction Temperature	Tj	-55	-	175	°C
Storage Temperature	Tstg	-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical damage.
   • Ensure proper mounting to a heat sink to manage thermal dissipation effectively.

2. Electrical Connections:

   • Connect the drain (D), gate (G), and source (S) terminals correctly.
   • Use short, low-inductance leads to minimize parasitic effects.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • Use thermal grease or thermal pads between the device and the heat sink for better thermal conductivity.

4. Biasing and Drive:

   • Apply the correct gate-source voltage (Vgs) to control the device.
   • Use a gate resistor to limit the current and prevent oscillations.

5. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from voltage spikes.
   • Consider using snubber circuits to suppress voltage transients.

6. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Operate within the specified temperature range to ensure reliable performance.

7. Testing and Verification:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly monitor the device’s performance to detect any potential issues early.

8. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static discharge.

(For reference only)