Details

---

BUY 2SC1226A https://www.utsource.net/itm/p/12611917.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCE	-	-	45	V	-
Collector-Base Voltage	VCB	-	-	45	V	-
Emitter-Base Voltage	VEB	-0.9	-	-2.0	V	-
Collector Current	IC	-	-	300	mA	-
Base Current	IB	-	-	30	mA	-
DC Current Gain	hFE	100	250	500	-	IC = 10mA, VCE = 10V
Transition Frequency	fT	-	200	-	MHz	-
Power Dissipation	PT	-	-	625	mW	TA = 25掳C
Junction Temperature	TJ	-	-	150	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SC1226A with care to avoid mechanical damage.
   • Ensure that the device is not exposed to excessive heat during soldering. Use a temperature-controlled soldering iron and keep soldering time to a minimum.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly according to the pin configuration.
   • Ensure that the voltage and current ratings are not exceeded to prevent damage to the transistor.

3. Operating Conditions:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Monitor the power dissipation and use appropriate heat sinking if necessary to keep the junction temperature within safe limits.

4. Storage:

   • Store the 2SC1226A in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect it from static electricity.

5. Testing:

   • Before installing the transistor in a circuit, test its parameters using a multimeter or a transistor tester to ensure it meets the specified values.

6. Safety:

   • Always follow proper safety procedures when working with electrical components.
   • Use appropriate personal protective equipment (PPE) such as gloves and goggles when handling and testing the transistor.

By following these instructions, you can ensure the reliable operation and longevity of the 2SC1226A transistor.

(For reference only)