Details

---

BUY MC33174 https://www.utsource.net/itm/p/12611926.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	-	40	V
Quiescent Current	IQ	No Load, VCC = 24V	-	100	-	渭A
Output Current	IO	Continuous, VCC = 24V	-	100	150	mA
Output Voltage	VOUT	No Load, VCC = 24V	-	24	-	V
Dropout Voltage	VDROP	IO = 100mA	-	0.8	-	V
Thermal Shutdown Temperature	TSD	-	-	160	-	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 4.5V to 40V.
   • Connect a bypass capacitor (typically 10渭F) between V_CC and GND close to the device to filter out noise and stabilize the supply.

2. Output Configuration:

   • The output can source up to 150mA continuously. For higher currents, ensure adequate heat dissipation.
   • Place a load resistor or device between the output and ground.

3. Thermal Considerations:

   • The device has thermal shutdown protection that activates at approximately 160掳C. Ensure proper heat sinking if operating near maximum current or in high ambient temperatures.

4. Stability:

   • To maintain stability, use a minimum load of 10mA.
   • If the output is not used, connect it to ground through a resistor to prevent floating.

5. Storage and Handling:

   • Store the device in a temperature range of -65掳C to 150掳C.
   • Handle with care to avoid damage from electrostatic discharge (ESD).

6. Application Notes:

   • Refer to the datasheet for detailed application circuits and specific recommendations for your design requirements.

For more detailed information, refer to the official datasheet of the MC33174.

(For reference only)