Details

---

BUY 17N80C3 TO-220 https://www.utsource.net/itm/p/12611951.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE(O)	-	-	80	V
Collector-Base Voltage	VCB(O)	-	-	80	V
Emitter-Base Voltage	VEB(O)	-	-	5	V
Continuous Collector Current	IC	-	-	17	A
Continuous Base Current	IB	-	-	2.5	A
Power Dissipation	PTOT	-	-	150	W
Junction Temperature	TJ	-20	-	150	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	1.0	-	掳C/W

Instructions for Use:

1. Mounting:

   • Ensure the transistor is mounted on a heatsink if operating at high power levels to maintain junction temperature within safe limits.
   • Use thermal compound between the transistor and heatsink to improve heat transfer.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure all connections are secure and free from shorts or open circuits.

3. Biasing:

   • Apply the appropriate base current (I_B) to control the collector current (I_C).
   • Use a current-limiting resistor in series with the base to prevent excessive base current.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Monitor the junction temperature to ensure it remains within the specified range.

5. Storage:

   • Store the transistor in a dry, cool environment to prevent damage.
   • Handle with care to avoid mechanical stress on the leads and body.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the transistor before installation.
   • Test the circuit under controlled conditions to ensure proper operation.

7. Safety:

   • Always follow proper electrical safety procedures when handling and testing the transistor.
   • Use appropriate personal protective equipment (PPE) when working with high voltages or currents.

(For reference only)