Details

---

BUY RTD2120L https://www.utsource.net/itm/p/12611963.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	-	2.7	-	5.5	V
Operating Temperature		-	-40	-	85	°C
Input Voltage Range	VIN	-	0	-	VDD	V
Output Current (Source)	IOUT	-	-	10	20	mA
Quiescent Current	IQ	-	-	3	5	μA
Response Time	τ	Rising/Falling Edge	-	10	-	μs
Signal-to-Noise Ratio	SNR	-	-	60	-	dB

Instructions for RTD2120L

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the VDD pin.
   • Ensure a stable power supply to avoid fluctuations affecting performance.

2. Input Signal:

   • Apply the input signal within the range of 0V to VDD.
   • Ensure that the input signal does not exceed the supply voltage to prevent damage.

3. Output Configuration:

   • The output can source up to 20mA, but it is recommended to operate at or below 10mA for optimal performance.
   • Use appropriate load resistance to match the current requirements.

4. Operating Environment:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Avoid exposing the device to environments with excessive humidity or corrosive gases.

5. Signal Handling:

   • For best performance, ensure the response time matches system requirements.
   • Maintain a high signal-to-noise ratio by minimizing noise sources in the vicinity of the device.

6. Quiescent Current:

   • Monitor the quiescent current, which should typically be around 3μA, to ensure efficient power usage.

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)