Details

---

BUY TES1-12704C https://www.utsource.net/itm/p/12612042.html

Parameter	Value
Part Number	TES1-12704C
Type	Thermistor
Material	NTC (Negative Temperature Coefficient)
Resistance at 25掳C	10k惟
Tolerance	卤1%
Operating Temperature Range	-40掳C to 125掳C
Dissipation Constant	3.0 mW/掳C
Thermal Time Constant	15 seconds
Lead Spacing	2.54 mm
Lead Diameter	0.51 mm
Case Size	3.0 x 3.0 x 1.5 mm
Max Power Rating	100 mW
Max Voltage	50 VDC

Instructions for Use

1. Handling:

   • Handle the TES1-12704C with care to avoid damaging the leads or the body.
   • Avoid exposing the thermistor to excessive mechanical stress.

2. Mounting:

   • Solder the leads quickly to prevent overheating, which can damage the thermistor.
   • Use a soldering iron with a temperature not exceeding 350掳C.
   • Ensure that the solder joints are clean and free from flux residues.

3. Electrical Connection:

   • Connect the thermistor in a circuit where it can be used to measure temperature changes.
   • Ensure that the voltage applied across the thermistor does not exceed the maximum rated voltage.

4. Calibration:

   • Calibrate the thermistor using a known temperature source to ensure accurate readings.
   • Use the resistance-temperature curve provided by the manufacturer for calibration.

5. Environmental Considerations:

   • Operate the thermistor within its specified temperature range to ensure reliable performance.
   • Protect the thermistor from moisture and corrosive environments.

6. Storage:

   • Store the thermistor in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the thermistor in its original packaging until ready for use to protect it from static electricity and physical damage.

7. Testing:

   • Test the thermistor periodically to ensure it is functioning correctly.
   • Measure the resistance at room temperature and compare it to the specified value.

8. Disposal:

   • Dispose of the thermistor in accordance with local environmental regulations.
   • Do not incinerate the thermistor as it may release harmful substances.

(For reference only)