Details

---

BUY 894H-2AH1-F-C-12V https://www.utsource.net/itm/p/12612044.html

Parameter	Value	Unit
Part Number	894H-2AH1-F-C-12V
Operating Voltage	12	V
Current Rating	2	A
Coil Resistance	60	惟
Inrush Current	200	mA
Operating Force	50	N
Contact Form	SPDT
Insulation Voltage	1000	V
Operating Temp	-25 to +85	掳C
Storage Temp	-40 to +125	掳C
Contact Material	Silver Alloy
Housing Material	PBT Glass Filled
Terminal Type	Solder Lug
Mounting Type	Panel Mount

Instructions:

1. Installation:

   • Ensure the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical stress.
   • Use the provided mounting hardware to securely attach the relay to the panel.

2. Wiring:

   • Connect the control circuit to the coil terminals (1 and 2).
   • Connect the load circuit to the contact terminals (3, 4, and 5) according to the contact form (SPDT).

3. Operation:

   • Apply the operating voltage (12V) to the coil terminals to energize the relay.
   • The relay will switch the contacts based on the control signal, connecting the common terminal (3) to either the normally open (4) or normally closed (5) terminal.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the contacts with a dry, lint-free cloth if necessary.

5. Safety:

   • Do not exceed the rated voltage or current.
   • Ensure the relay is disconnected from the power source before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)