Details

---

BUY HCPL-0630-500 https://www.utsource.net/itm/p/12612060.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA		1.2	1.6	V
Reverse Breakdown Voltage	V_BR	IR = 10 渭A	5			V
Peak Reverse Current	I_PR	VR = VBR			5	mA
Output Collector-Emitter Saturation Voltage	V_CE(sat)	IC = 10 mA, IF = 20 mA		0.3	0.5	V
Output Collector Leakage Current	I_CBO	VCE = 5 V, IF = 0 mA			10	nA
Propagation Delay Time	tPLH	IF = 20 mA, IC = 10 mA	20		50	ns
Propagation Delay Time	tPHL	IF = 20 mA, IC = 10 mA	20		50	ns
Pulse Width Distortion	tPWD	IF = 20 mA, IC = 10 mA	-10		10	ns
Common Mode Transient Immunity	CMTI	IF = 20 mA, IC = 10 mA		25		kV/渭s

Instructions for HCPL-0630-500:

1. Mounting and Handling:

   • Handle the device with care to avoid damage to the leads and body.
   • Ensure proper mounting on the PCB to prevent mechanical stress.

2. Power Supply:

   • Apply the recommended input forward current (IF) of 20 mA for optimal performance.
   • Ensure the reverse voltage does not exceed the specified breakdown voltage (V_BR).

3. Signal Integrity:

   • Keep signal traces as short as possible to minimize noise and interference.
   • Use appropriate bypass capacitors near the power supply pins to ensure stable operation.

4. Operating Temperature Range:

   • Operate within the temperature range specified by the manufacturer to ensure reliability and longevity.

5. Storage:

   • Store in a dry, cool environment to prevent moisture damage.
   • Follow ESD handling guidelines to protect against electrostatic discharge.

6. Testing:

   • Perform initial testing at room temperature using the specified test conditions.
   • Regularly check output parameters like collector-emitter saturation voltage and leakage current to ensure the device is functioning correctly.

7. Safety:

   • Always adhere to safety standards and guidelines when working with electrical components.
   • Avoid exceeding maximum ratings for voltage, current, and power dissipation.

(For reference only)