Details

---

BUY IR2113-1 https://www.utsource.net/itm/p/12612083.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	10	-	20	V	Operating supply voltage range
Bootstrap Supply Voltage	VBS	10	-	20	V	Operating bootstrap supply voltage range
Input High Level Voltage	VIH	4.5	-	20	V	Minimum input high level voltage for logic inputs
Input Low Level Voltage	VIL	-0.3	-	0.8	V	Maximum input low level voltage for logic inputs
Output Source Current	IOH	-	0.5	1.0	A	Output source current capability at VOH = 15V, VCC = 15V
Output Sink Current	IOL	-	-1.0	-1.5	A	Output sink current capability at VOL = 0.4V, VCC = 15V
Propagation Delay Time	tpd	-	40	60	ns	Typical propagation delay time from input to output
Rise Time	tr	-	20	30	ns	Typical rise time of output signals
Fall Time	tf	-	20	30	ns	Typical fall time of output signals
Operating Temperature Range	TA	-40	-	125	°C	Ambient operating temperature range
Storage Temperature Range	TSTG	-55	-	150	°C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (V_CC) is within the range of 10V to 20V.
   • The bootstrap supply voltage (V_BS) should also be within the same range.

2. Input Logic Levels:

   • For a valid high input, the voltage (V_IH) must be at least 4.5V.
   • For a valid low input, the voltage (V_IL) must not exceed 0.8V.

3. Output Current:

   • The device can source up to 1.0A and sink up to 1.5A, with typical values being 0.5A and -1.0A, respectively.

4. Timing Parameters:

   • The propagation delay (t_pd) is typically between 40ns and 60ns.
   • The rise time (t_r) and fall time (t_f) are both typically between 20ns and 30ns.

5. Temperature Considerations:

   • The device is designed to operate in ambient temperatures ranging from -40°C to 125°C.
   • It can be stored in temperatures ranging from -55°C to 150°C.

6. Handling and Storage:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Store the device in a dry environment to prevent moisture damage.

7. Application Notes:

   • The IR2113-1 is suitable for high-side and low-side gate drive applications in power electronics.
   • Ensure proper decoupling capacitors are used to stabilize the supply voltages and reduce noise.

For detailed application circuits and further information, refer to the datasheet provided by the manufacturer.

(For reference only)