Details

---

BUY AD628ARZ https://www.utsource.net/itm/p/12612114.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD to VSS	-0.3		18	V
Input Voltage Range	VCM	-0.3		16	V
Output Voltage Swing	RL = 2k惟	0.5		17.5	V
Input Offset Voltage		-1	0	1	mV
Input Bias Current		-1	0	1	nA
Input Offset Current		-0.1	0	0.1	nA
Common Mode Rejection	f = 0 Hz	90			dB
Power Supply Rejection	f = 0 Hz	100			dB
Bandwidth	G = +1, VPP = 4V		1.5		MHz
Slew Rate			0.5		V/渭s
Quiescent Current	Per Amplifier		1.5		mA

Instructions for AD628ARZ:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (-0.3V to 18V) to avoid damage to the device.
   • Use decoupling capacitors (typically 0.1 渭F) close to the power supply pins to minimize noise.

2. Input Signal:

   • Keep the input signal within the common mode voltage range (-0.3V to 16V) relative to the negative supply.
   • Avoid exceeding the maximum input voltage to prevent latch-up or damage.

3. Output Load:

   • For optimal performance, connect a load resistor of at least 2k惟 to ensure the output can swing within the specified voltage range (0.5V to 17.5V).

4. Offset Adjustment:

   • The input offset voltage should be minimized using external components if necessary. Refer to the datasheet for specific offset adjustment techniques.

5. Operating Temperature:

   • Operate the device within the temperature range specified in the datasheet to ensure reliable operation and longevity.

6. Handling Precautions:

   • Handle the device with care as it is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

7. Mounting:

   • Ensure proper mounting on the PCB to maintain thermal stability and mechanical integrity. Follow manufacturer guidelines for recommended layout and soldering practices.

8. Testing:

   • After assembly, test the device under typical operating conditions to verify its functionality and performance parameters.

(For reference only)