Details

---

BUY G6D-1A-ASI-24VDC https://www.utsource.net/itm/p/12612133.html

Parameter	Description
Part Number	G6D-1A-ASI-24VDC
Type	Photoelectric Sensor, Through-Beam Type
Supply Voltage	24 VDC (±10%)
Current Consumption	≤ 50 mA (at 24 VDC)
Output Type	NPN Open Collector
Output Current	Max. 100 mA (at 30 VDC)
Response Time	≤ 1 ms (Light On/Dark Off)
Detection Distance	0.1 to 50 m (Adjustable)
Operating Temperature	-25°C to +70°C
Storage Temperature	-40°C to +85°C
Humidity	5% to 95% RH (Non-condensing)
Housing Material	PBT (Polybutylene Terephthalate)
Lens Material	Polycarbonate
Connector	M12 4-pin Connector
Protection Class	IP67
Weight	Approx. 50 g

Instructions

1. Installation:

   • Ensure the sensor is installed in a location that is free from dust, moisture, and extreme temperatures.
   • Use the provided mounting brackets to secure the sensor in place.

2. Wiring:

   • Connect the power supply to the sensor using the M12 4-pin connector.
   • Pin 1: Brown (Positive)
   • Pin 2: Blue (Negative)
   • Pin 3: Black (Output)
   • Pin 4: White (Common)

3. Adjustment:

   • Adjust the detection distance using the potentiometer on the sensor.
   • Turn the potentiometer clockwise to increase the detection distance and counterclockwise to decrease it.

4. Operation:

   • When an object breaks the beam between the transmitter and receiver, the output changes state.
   • The output is normally open and will close when the beam is broken (NPN open collector).

5. Maintenance:

   • Regularly clean the lens with a soft, dry cloth to maintain optimal performance.
   • Avoid exposing the sensor to harsh chemicals or solvents.

6. Troubleshooting:

   • If the sensor does not respond, check the wiring connections and ensure the power supply is within the specified range.
   • If the detection distance is inconsistent, recalibrate the sensor by adjusting the potentiometer.

(For reference only)