Details

---

BUY NTMD5838NLR2G https://www.utsource.net/itm/p/12612144.html

Parameter	Value/Description
Part Number	NTMD5838NLR2G
Type	Multilayer Ceramic Capacitor (MLCC)
Capacitance	2.2 渭F
Voltage Rating (DC)	50 V
Tolerance	卤10%
Temperature Coefficient	X7R (卤15% from -55掳C to +125掳C)
Operating Temperature Range	-55掳C to +125掳C
Case Size	3812 (EIA) / 9.65 x 7.62 mm (Metric)
Termination	Tin/Lead (Sn/Pb) Solder Plated
RoHS Compliance	Non-RoHS
Lead Time	8-10 weeks
Package Type	Tape & Reel
Mounting Type	Surface Mount Technology (SMT)
Standards/Compliance	MIL-STD-202, MIL-STD-883

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Use a soldering iron with a temperature setting of 320掳C to 350掳C.
   • Ensure the soldering time does not exceed 10 seconds per joint.
   • Avoid excessive thermal shock during soldering.

3. Mounting:

   • Place the capacitor on the PCB as per the design layout.
   • Ensure proper alignment and orientation.
   • Apply even pressure during reflow soldering to ensure good contact.

4. Testing:

   • Perform visual inspection to check for any physical defects.
   • Use a multimeter or capacitance meter to verify the capacitance value.
   • Conduct functional testing as per the application requirements.

5. Environmental Considerations:

   • The component is non-RoHS compliant, so ensure it meets the environmental regulations of your region.
   • Dispose of the component according to local waste management guidelines.

6. Troubleshooting:

   • If the capacitor fails to meet the specified parameters, check for proper soldering, correct orientation, and any damage during handling.
   • Replace the capacitor if it shows signs of physical damage or electrical failure.

(For reference only)