Details

---

BUY LT1012CN8#PBF https://www.utsource.net/itm/p/12612203.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	2.7	-	36	V
Quiescent Current	IQ	-	2.5	-	mA
Input Offset Voltage	Vos	-	0.2	-	mV
Input Bias Current	IB	-	10	-	nA
Input Voltage Range	Vin	0	-	Vcc-1.5	V
Output Voltage Swing	Vout	0	-	Vcc-1.5	V
Slew Rate	SR	-	0.4	-	V/μs
Bandwidth (Unity Gain)	f-3dB	-	1.2	-	MHz
Common Mode Rejection Ratio	CMRR	-	90	-	dB
Power Supply Rejection Ratio	PSRR	-	80	-	dB
Operating Temperature	Temp	-40	-	85	°C

Instructions for Using LT1012CN8#PBF:

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 2.7V to 36V.
   • Use appropriate decoupling capacitors (typically 0.1μF and 10μF) close to the power pins to stabilize the supply.

2. Input Signals:

   • The input voltage should not exceed Vcc - 1.5V or go below 0V.
   • Avoid applying voltages outside this range to prevent damage to the device.

3. Output Load:

   • The output can swing from 0V to Vcc - 1.5V.
   • Ensure the load is properly matched to avoid excessive current draw.

4. Biasing:

   • The input bias current is very low (10nA typical), but ensure that input sources have appropriate biasing to avoid errors.

5. Stability:

   • The device has a unity gain bandwidth of 1.2MHz and a slew rate of 0.4V/μs.
   • Use compensation if necessary for stability, especially at higher gains.

6. Temperature Range:

   • The operating temperature range is from -40°C to 85°C.
   • Ensure the device is used within this range to maintain performance and reliability.

7. Mounting and Handling:

   • Handle the device with care to avoid static discharge.
   • Follow standard PCB layout guidelines to minimize noise and interference.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.

9. Storage:

   • Store the device in a dry, cool place away from direct sunlight and moisture to prevent degradation.

(For reference only)