Details

---

BUY TLV9064IRTER https://www.utsource.net/itm/p/12612209.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.8	-	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	46	-	μA	Supply current at no load
Input Offset Voltage	VIO	-	2	-	mV	Maximum input offset voltage
Input Bias Current	IB	-	30	-	pA	Typical input bias current
Common-Mode Rejection Ratio	CMRR	-	98	-	dB	Common-mode rejection ratio at DC
Power-Supply Rejection Ratio	PSRR	-	98	-	dB	Power-supply rejection ratio at DC
Slew Rate	SR	-	0.7	-	V/μs	Slew rate
Gain Bandwidth Product	GBP	-	1.4	-	MHz	Gain bandwidth product
Output Voltage Swing	VOS	-	VDD-1.2	-	V	Output voltage swing from each rail

Instructions for Use:

1. Supply Voltage Configuration:

   • Ensure the supply voltage (V_DD) is within the specified range of 1.8V to 5.5V.

2. Input Signal Handling:

   • Keep input signals within the common-mode input voltage range to avoid distortion and ensure accurate operation.

3. Powering the Device:

   • Connect the power supply carefully, ensuring correct polarity. The device can be damaged by reverse voltage or overvoltage conditions.

4. Output Load Considerations:

   • The output can swing close to the rails but not fully reach them. Plan your circuit design to accommodate this limitation.

5. Thermal Management:

   • While the device operates efficiently, ensure adequate heat dissipation if used in high-power applications or enclosed environments.

6. Stability and Compensation:

   • For stability, especially at higher gains, consider external compensation techniques as needed based on application requirements.

7. Handling Electrostatic Discharge (ESD):

   • Handle the device with appropriate ESD precautions to prevent damage.

8. Layout Recommendations:

   • Place the device close to its bypass capacitors and maintain short leads to minimize noise pickup.

(For reference only)