Details

---

BUY MICROCHIP TECH MCP4716A0T-E/CH https://www.utsource.net/itm/p/12612210.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		5.5	V
Output Voltage Range	VOUT		0		VDD	V
Reference Voltage	VREF	Internal	1.2		1.2	V
Digital Interface		I2C
Resolution		12-bit				bits
Output Type		Voltage Output
Power Consumption	IDD	Active, VDD = 5V		6		渭A
Operating Temperature		Industrial	-40		85	掳C

Instructions for Use:

1. Power Supply: Connect the VDD pin to a power supply within the range of 2.7V to 5.5V. Ensure GND is properly connected to the ground.

2. I2C Communication:

   • Initialize the I2C interface with appropriate SDA and SCL connections.
   • Use standard I2C protocol commands to communicate with the device.
   • The device has a default I2C address; check the datasheet for details on how to modify it if needed.

3. Output Configuration:

   • The MCP4716A0T-E/CH provides a voltage output that can be configured using the internal register settings.
   • Set the desired DAC value through I2C writes to control the output voltage.

4. Reference Voltage:

   • The internal reference voltage is fixed at 1.2V. This reference voltage is used to scale the output voltage.

5. Temperature Considerations:

   • Ensure the operating environment remains within -40掳C to 85掳C to maintain specified performance characteristics.

6. Powering Down:

   • When not in use, power down the device by disconnecting VDD or setting the device into a low-power state via software command if supported.

7. Handling Static Electricity:

   • Be cautious of static electricity which can damage sensitive components. Handle with appropriate ESD precautions.

Refer to the full datasheet for detailed specifications and additional application notes.

(For reference only)