Details

---

BUY ABT16245A https://www.utsource.net/itm/p/12612213.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	Vcc	2.0	3.3	5.5	V
Output Current per Pin	Iout	-	25	50	mA	Voh, Vol
Output High Voltage	Voh	-	Vcc-0.2	-	V	Iout = 5mA
Output Low Voltage	Vol	-	0.2	-	V	Iout = 5mA
Input Voltage Range	Vin	0	-	Vcc	V
Propagation Delay Time	tpd	-	5	9	ns	Vcc = 3.3V
Power Dissipation	Pd	-	-	650	mW	Ta = 25掳C
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions:

1. Supply Voltage (Vcc): Ensure the supply voltage is within the range of 2.0V to 5.5V to avoid damage to the device.
2. Output Current (Iout): The device can provide up to 50mA per output pin, but for optimal performance, keep the current at or below 25mA.
3. Output Voltage Levels (Voh, Vol): The output high voltage (Voh) should be at least Vcc - 0.2V when sourcing 5mA, and the output low voltage (Vol) should be no more than 0.2V when sinking 5mA.
4. Input Voltage Range (Vin): The input voltage should be between 0V and Vcc to ensure proper operation.
5. Propagation Delay (tpd): The propagation delay time is typically 5ns at a supply voltage of 3.3V.
6. Power Dissipation (Pd): The maximum power dissipation is 650mW at an ambient temperature of 25掳C. Ensure adequate heat dissipation if operating near this limit.
7. Operating Temperature (Topr): The device is designed to operate within a temperature range of -40掳C to 85掳C.
8. Storage Temperature (Tstg): Store the device in an environment with temperatures ranging from -65掳C to 150掳C.

Additional Notes:

• Always use appropriate decoupling capacitors (e.g., 0.1渭F ceramic capacitors) close to the power pins to minimize noise and ensure stable operation.
• Ensure that the device is not subjected to voltages or currents exceeding the specified limits to prevent damage.
• For extended reliability, operate the device within the recommended conditions rather than the absolute maximum ratings.

(For reference only)