Details

---

BUY MCP1703T-5002E/MC https://www.utsource.net/itm/p/12612214.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	1.7	-	6.5	V
Output Voltage	VOUT	Fixed	-	5.0	-	V
Output Current	IOUT	Continuous	-	250	-	mA
Quiescent Current	IQ	VIN = 3V, ILOAD = 0mA	-	2.0	-	μA
Dropout Voltage	VDROPOUT	IOUT = 250mA	-	280	-	mV
Load Regulation		IOUT: 0mA to 250mA	-	0.4	-	%
Line Regulation		VIN: 2.7V to 6.5V	-	0.2	-	%
Power Supply Rejection	PSRR	f = 120Hz	-	70	-	dB
Thermal Shutdown	TSD	Typical	-	160	-	°C

Instructions for Use:

1. Input Voltage (VIN): Ensure the input voltage is within the operating range of 1.7V to 6.5V. The device is designed to operate efficiently within this range.

2. Output Voltage (VOUT): This regulator provides a fixed output voltage of 5.0V. It is not adjustable.

3. Output Current (IOUT): The MCP1703T-5002E/MC can supply up to 250mA continuously. Ensure your load does not exceed this limit to avoid damage or overheating.

4. Quiescent Current (IQ): At no load and with an input voltage of 3V, the quiescent current is typically 2.0μA. This parameter is important for low-power applications.

5. Dropout Voltage (VDROPOUT): With a maximum dropout voltage of 280mV at full load, this regulator can maintain regulation even when the difference between input and output voltages is small.

6. Load and Line Regulation: The load regulation is 0.4% from no load to full load, and the line regulation is 0.2% across the specified input voltage range, ensuring stable output under varying conditions.

7. Power Supply Rejection Ratio (PSRR): The device offers a high PSRR of 70dB at 120Hz, effectively rejecting noise from the power supply.

8. Thermal Shutdown (TSD): The device includes thermal protection that activates around 160°C, safeguarding against overheating.

9. Installation and Handling: Handle the component with care to avoid static damage. Follow standard surface-mount technology (SMT) practices for installation. Ensure proper ventilation and heat dissipation if used in high-power applications.

(For reference only)