Details

---

BUY MAXIM INTEGRATED MAX3283EAUT+T https://www.utsource.net/itm/p/12612216.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7		5.5	V
Output Current per Channel	IO	High-level output current	-400			渭A
Low-level output current			-16			mA
Input Leakage Current	IIH, IIL	VI = VCC or GND	-1		1	渭A
Propagation Delay Time	tPLH, tPHL	VO = 1.5V		10		ns
Power Dissipation	PD	All outputs high			85	mW
Operating Temperature Range	Toper		-40		85	掳C

Instructions for MAX3283EAUT+T:

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the range of 2.7V to 5.5V.
   • Ensure the GND pin is connected to the system ground.

2. Signal Routing:

   • Route input signals to the appropriate input pins (INx).
   • Connect output pins (OUTx) to the devices or circuits they are intended to drive.

3. Handling Static Electricity:

   • The device is sensitive to static electricity; handle with care and use anti-static precautions during installation.

4. Operating Environment:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.

5. Output Load Considerations:

   • Be mindful of the maximum output current capabilities when connecting loads to avoid damage or malfunction.

6. Propagation Delay:

   • Account for the propagation delay of 10ns in timing-sensitive applications.

7. Power Dissipation:

   • Ensure that the power dissipation does not exceed 85mW to prevent overheating.

8. Input Signal Levels:

   • Ensure input signals do not exceed VCC or fall below GND to prevent damage to the device.

9. Storage and Handling:

   • Store in original packaging until ready for use to protect against moisture and static.

For detailed specifications and application notes, refer to the official Maxim Integrated documentation for the MAX3283EAUT+T.

(For reference only)