Details

---

BUY SLA3011M https://www.utsource.net/itm/p/12612217.html

Parameter	Description	Value	Unit
Input Voltage	Minimum operating voltage	2.7	V
	Maximum operating voltage	5.5	V
Output Voltage	Fixed output voltage	3.3	V
Quiescent Current	Operating current when no load is applied	2.0	渭A
Dropout Voltage	Difference between input and output voltage	0.3	V
Load Current	Maximum load current	150	mA
PSRR (Power Supply Rejection Ratio) at 1kHz	Ability to reject ripple from the input supply	65	dB
Operating Temperature	Junction temperature range	-40 to +85	掳C
Storage Temperature	Temperature range for storage	-65 to +150	掳C

Instructions for SLA3011M

1. Input Connection: Connect the positive terminal of the input voltage source to the VIN pin of the SLA3011M. Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Connection: Connect the load or circuit requiring a stable 3.3V supply to the VOUT pin.

3. Ground Connection: Ensure a common ground connection between the input voltage source, SLA3011M, and the load by connecting them to the GND pin.

4. Capacitors:

   • Place a 1渭F ceramic capacitor close to the VIN pin to stabilize the input voltage.
   • Place a 1渭F ceramic capacitor close to the VOUT pin to filter the output voltage.

5. Thermal Considerations: The device can operate up to a junction temperature of 85掳C. Ensure adequate heat dissipation if used in high ambient temperatures or under high load conditions.

6. Storage and Handling: Store the device in a dry place within the temperature range of -65掳C to +150掳C. Follow standard ESD (Electrostatic Discharge) precautions during handling.

7. Testing: Before integrating into a final design, test the regulator with a known load to ensure it meets the required specifications.

(For reference only)